Product Description

The sludge ball press can be used for forming sludge, clay, coal powder, coke powder, blue carbon powder, black and non-ferrous metal powders such as iron powder, manganese ore powder, dust ash, zinc ore powder and other materials. It is metallurgy. Ball-forming equipment for chemical, building materials and other industries. It has the characteristics of good molding effect, sturdiness and durability, and simple maintenance.

Product Advantage

Product Potential

1. Zhengzhou Weilit sludge ball press combines the characteristics of sludge, reasonable design, and is made of high-quality materials. The machine has the advantages of strong stability, wear resistance, high production quality, performance, easy operation, small investment, quick results, etc.

2. The sludge ball press has simple operation, short process flow, low energy consumption and low failure rate. The main roller part adopts high-quality alloy steel material, which greatly improves the wear resistance and pressure resistance.

3. Zhengzhou Weilit can provide you with the project design and process design of the sludge ball press, which is suitable for the formulation of your machinery and equipment purchase plan, and design and manufacture products according to your special needs.

Product Parameter

technical parameter

model	Hourly production (t/h)	Roll width (mm)	Roll diameter (mm)	Power (kw)	Spindle speed (r/min)
WL-360	2-4	250	360	7.5	18
WL-400	4-8	280	400	11-15	15
WL-500	8-11	300	500	18.5-22	13
WL-650	11-18	336	650	20-30	13
WL-750	18-25	400	750	45	13
WL-850	25-35	500	850	75	10
WL-1250	35-70	650	1250	130	10

Working Principle

Equipment structure

1. The feeding part is mainly to realize quantitative feeding to ensure that the material evenly enters the roller room. If the feeding amount is too large, the electric power of the feeding device will be overloaded; if the feeding amount is too small, the ball will not be formed. Therefore, skilled operation is an important condition to ensure the normal work of the pressure ball. 　

2. In the transmission part, the main transmission system is: motor-triangle belt-reducer-open gear-roller.　　

3. The forming part mainly refers to the main machine part, and the core part is the roll. This machine can adjust the pressure according to the requirements of the pressure ball density, and the production is flexible and flexible.

Production capacity

According to the production capacity of the sludge ball press, it can be divided into different models. Common models are 1250, 1000, 850, 650, 360 and other models. The larger the model, the stronger the production capacity. In addition, the diameter and width of the forming roll of the sludge ball press are the main factors that determine the production capacity. Pay special attention when purchasing.

Pressure positioning

The pressure of the sludge ball press is divided into low pressure (line specific pressure 0.3-0.8 t/cm), medium pressure (line specific pressure 1-2 t/cm), and high pressure (line specific pressure 2-4 t/cm). Big category. Users can choose the right pressure according to your production needs.

Finished spherical

The sludge ball press can produce square, ball-and-egg, round, goose-egg, pillow and other spherical shapes for users to choose from. The special ball press sphere can be defined by our company according to the needs of users. The finished product sample is shown in the figure below: